Perfect Cut decals are made of outdoor vinyl, permanent adhesive, image cut to the outside dimension of logo, full color detail is printed with a 3 yr outdoor rating. Supplied with a clear liner, transfer tape, and application instructions. Made in the USA.

Our popular Die - Cut Decals are supplied with a "Pre Mask" liner to help you apply the decal with precision. While most of our cards have instructions, sometime the print is small. Plus in the future we are adding a QR code that will bring you to this page for larger & easier to read instructions.

Directions for application:

1. Clean surface thoroughly (temperature should be above 50° f)

2. Turn decal upside-down (imprint side down) and place on a flat surface.

3. Separate the clear liner from the foggy “pre-mask” material making sure the decal stays attached to the “pre-mask”. If needed, use your fingernail to hold the edge of the decal to the “pre-mask” when removing clear liner.

4. Carefully place decal in desired position. With fingers (or a credit card) firmly rub decal from the center out in all directions.

5. Remove “pre-mask” at a 180 degree angle (rub down decal as necessary).

6. Puncture bubbles with sharp needle; then lightly press area to remove trapped air.